Health New Zealand Te Whatu Ora Shared Care FHIR API
0.4.2 - release New Zealand flag

Health New Zealand Te Whatu Ora Shared Care FHIR API - Local Development build (v0.4.2) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: SharedCareClaim - Detailed Descriptions

Draft as of 2025-09-16

Definitions for the SharedCareClaim resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Claim
Definition

A provider issued list of professional services and products which have been provided, or are to be provided, to a patient which is sent to an insurer for reimbursement.

ShortClaim, Pre-determination or Pre-authorization
Comments

The Claim resource fulfills three information request requirements: Claim - a request for adjudication for reimbursement for products and/or services provided; Preauthorization - a request to authorize the future provision of products and/or services including an anticipated adjudication; and, Predetermination - a request for a non-bind adjudication of possible future products and/or services.

Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesAdjudication Request, Preauthorization Request, Predetermination Request
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Claim.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Claim.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Claim.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. Claim.extension:traceNumber
    Slice NametraceNumber
    Definition

    Internal primary key ID for shared care claim tracking

    ShortShared Care Claim Trace Number
    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(Shared Care Claim Trace Number) (Extension Type: Identifier)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    8. Claim.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. Claim.identifier
    Definition

    A unique identifier assigned to this claim.

    ShortBusiness identifier(s) for the claimBusiness Identifier for claim
    Comments

    Business identifier(s) for the claim (external and/or internal identifiers)

    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..*
    TypeIdentifier
    Is Modifierfalse
    Summaryfalse
    Requirements

    Allows claims to be distinguished and referenced.

    Alternate NamesClaim Number
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Claim.status
    Definition

    The status of the resource instance.

    Shortactive | cancelled | draft | entered-in-error
    Comments

    This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from FinancialResourceStatusCodeshttp://hl7.org/fhir/ValueSet/fm-status|4.0.1
    (required to http://hl7.org/fhir/ValueSet/fm-status|4.0.1)

    A code specifying the state of the resource instance.

    Typecode
    Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. Claim.type
    Definition

    The category of claim, e.g. oral, pharmacy, vision, institutional, professional.

    ShortClaim typeCategory or discipline
    Comments

    Outpatient claim from a telehealth physician


    The majority of jurisdictions use: oral, pharmacy, vision, professional and institutional, or variants on those terms, as the general styles of claims. The valueset is extensible to accommodate other jurisdictional requirements.

    Control1..1
    BindingUnless not suitable, these codes SHALL be taken from NZ Claim Typeshttp://hl7.org/fhir/ValueSet/claim-type|4.0.1
    (extensible to https://fhir-ig.digital.health.nz/shared-care/ValueSet/nz-claim-types)
    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Requirements

    Claim type determine the general sets of business rules applied for information requirements and adjudication.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Claim.subType
    Definition

    A finer grained suite of claim type codes which may convey additional information such as Inpatient vs Outpatient and/or a specialty service.

    ShortClaim subtypeMore granular claim type
    Comments

    This may contain the local bill type codes, for example the US UB-04 bill type code or the CMS bill type.

    Control0..1
    BindingUnless not suitable, these codes SHALL be taken from For example codes, see NZ Claim Subtypeshttp://hl7.org/fhir/ValueSet/claim-subtype|4.0.1
    (extensible to https://fhir-ig.digital.health.nz/shared-care/ValueSet/nz-claim-subtypes)
    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Some jurisdictions need a finer grained claim type for routing and adjudication.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. Claim.use
    Definition

    A code to indicate whether the nature of the request is: to request adjudication of products and services previously rendered; or requesting authorization and adjudication for provision in the future; or requesting the non-binding adjudication of the listed products and services which could be provided in the future.

    Shortclaim | preauthorization | predetermination
    Control1..1
    BindingThe codes SHALL be taken from Usehttp://hl7.org/fhir/ValueSet/claim-use|4.0.1
    (required to http://hl7.org/fhir/ValueSet/claim-use|4.0.1)

    The purpose of the Claim: predetermination, preauthorization, claim.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    This element is required to understand the nature of the request for adjudication.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. Claim.patient
    Definition

    The party to whom the professional services and/or products have been supplied or are being considered and for whom actual or forecast reimbursement is sought.

    ShortPatient with NHIThe recipient of the products and services
    Control1..1
    TypeReference(Patient)
    Is Modifierfalse
    Summarytrue
    Requirements

    The patient must be supplied to the insurer so that confirmation of coverage and service history may be considered as part of the authorization and/or adjudiction.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. Claim.billablePeriod
    Definition

    The period for which charges are being submitted.

    ShortClaim period or billing periodRelevant time frame for the claim
    Comments

    Typically this would be today or in the past for a claim, and today or in the future for preauthorizations and predeterminations. Typically line item dates of service should fall within the billing period if one is specified.

    Control0..1
    TypePeriod
    Is Modifierfalse
    Summarytrue
    Requirements

    A number jurisdictions required the submission of the billing period when submitting claims for example for hospital stays or long-term care.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. Claim.created
    Definition

    The date this resource was created.

    ShortWhen the claim was created (by the provider)Resource creation date
    Comments

    This field is independent of the date of creation of the resource as it may reflect the creation date of a source document prior to digitization. Typically for claims all services must be completed as of this date.

    Control1..1
    TypedateTime
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to record a timestamp for use by both the recipient and the issuer.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. Claim.insurer
    Definition

    The Insurer who is target of the request.

    ShortPayer (i.e. Health NZ)Target
    Control0..1
    TypeReference(Organization)
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. Claim.provider
    Definition

    The provider which is responsible for the claim, predetermination or preauthorization.

    ShortLegal entity who submitted the claimParty responsible for the claim
    Comments

    Legal entity who submitted the claim - identifiable by its HPI identifier (or also its NZBN)


    Typically this field would be 1..1 where this party is responsible for the claim but not necessarily professionally responsible for the provision of the individual products and services listed below.

    Control1..1
    TypeReference(Organization, Practitioner, PractitionerRole, Organization)
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    30. Claim.priority
    Definition

    The provider-required urgency of processing the request. Typical values include: stat, routine deferred.

    ShortDesired processing ugency
    Comments

    If a claim processor is unable to complete the processing as per the priority then they should generate and error and not process the request.

    Control1..1
    BindingFor example codes, see ProcessPriorityCodeshttp://hl7.org/fhir/ValueSet/process-priority|4.0.1
    (example to http://hl7.org/fhir/ValueSet/process-priority|4.0.1)

    The timeliness with which processing is required: stat, normal, deferred.

    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Requirements

    The provider may need to indicate their processing requirements so that the processor can indicate if they are unable to comply.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    32. Claim.payee
    Definition

    The party to be reimbursed for cost of the products and services according to the terms of the policy.

    ShortWho's getting paid - Provider Site in HSAAPRecipient of benefits payable
    Comments

    Should correspond to a Provider Site in HSAAP that is the holder of the agreement/contract and a Supplier Site in FPIM


    Often providers agree to receive the benefits payable to reduce the near-term costs to the patient. The insurer may decline to pay the provider and choose to pay the subscriber instead.

    Control0..1
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Requirements

    The provider needs to specify who they wish to be reimbursed and the claims processor needs express who they will reimburse.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    34. Claim.payee.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    36. Claim.payee.type
    Definition

    Type of Party to be reimbursed: subscriber, provider, other.

    ShortCategory of recipient
    Control1..1
    BindingFor example codes, see Claim Payee Type Codeshttp://hl7.org/fhir/ValueSet/payeetype|4.0.1
    (example to http://hl7.org/fhir/ValueSet/payeetype|4.0.1)

    A code for the party to be reimbursed.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Need to know who should receive payment with the most common situations being the Provider (assignment of benefits) or the Subscriber.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    38. Claim.careTeam
    Definition

    The members of the team who provided the products and services.

    ShortPractitioner(s) who provided the claimed service(s)Members of the care team
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Requirements

    Common to identify the responsible and supporting practitioners.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    40. Claim.careTeam.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    42. Claim.careTeam.sequence
    Definition

    A number to uniquely identify care team entries.

    ShortOrder of care team
    Control1..1
    TypepositiveInt
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Requirements

    Necessary to maintain the order of the care team and provide a mechanism to link individuals to claim details.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    44. Claim.careTeam.provider
    Definition

    Member of the team who provided the product or service.

    ShortPractitioner or organization
    Control1..1
    TypeReference(Practitioner, Practitioner, PractitionerRole, Organization)
    Is Modifierfalse
    Summaryfalse
    Requirements

    Often a regulatory requirement to specify the responsible provider.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    46. Claim.careTeam.role
    Definition

    The lead, assisting or supervising practitioner and their discipline if a multidisciplinary team.

    ShortFunction within the team
    Comments

    Role might not be required when there is only a single provider listed.

    Control0..1
    BindingUnless not suitable, these codes SHALL be taken from For example codes, see Claim Care Team Role Codeshttp://hl7.org/fhir/ValueSet/claim-careteamrole|4.0.1
    (extensible to https://fhir-ig.digital.health.nz/shared-care/ValueSet/claim-careteam-role-codes)
    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    When multiple parties are present it is required to distinguish the roles performed by each member.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    48. Claim.careTeam.qualification
    Definition

    The qualification of the practitioner which is applicable for this service.

    ShortPractitioner credential or specialization
    Control0..1
    BindingUnless not suitable, these codes SHALL be taken from For example codes, see Provider Qualification Codeshttp://hl7.org/fhir/ValueSet/provider-qualification|4.0.1
    (extensible to https://fhir-ig.digital.health.nz/shared-care/ValueSet/provider-qualification-codes)
    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Need to specify which qualification a provider is delivering the product or service under.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    50. Claim.supportingInfo
    Definition

    Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues.

    ShortAdditional attributes that may accompany a ClaimSupporting information
    Comments

    Additional attributes that may accompany a Claim including categorisation, coding, date or time, value, and reason. Probably not required by a 24/7 Telehealth claim but used for more specialised HSAAP pharmacy claims.


    Often there are multiple jurisdiction specific valuesets which are required.

    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Requirements

    Typically these information codes are required to support the services rendered or the adjudication of the services rendered.

    Alternate NamesAttachments Exception Codes Occurrence Codes Value codes
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    52. Claim.supportingInfo.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    54. Claim.supportingInfo.sequence
    Definition

    A number to uniquely identify supporting information entries.

    ShortInformation instance identifier
    Control1..1
    TypepositiveInt
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Requirements

    Necessary to maintain the order of the supporting information items and provide a mechanism to link to claim details.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    56. Claim.supportingInfo.category
    Definition

    The general class of the information supplied: information; exception; accident, employment; onset, etc.

    ShortClassification of the supplied information
    Comments

    This may contain a category for the local bill type codes.

    Control1..1
    BindingFor example codes, see ClaimInformationCategoryCodeshttp://hl7.org/fhir/ValueSet/claim-informationcategory|4.0.1
    (example to http://hl7.org/fhir/ValueSet/claim-informationcategory|4.0.1)

    The valuset used for additional information category codes.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Required to group or associate information items with common characteristics. For example: admission information or prior treatments.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    58. Claim.insurance
    Definition

    Financial instruments for reimbursement for the health care products and services specified on the claim.

    ShortPatient insurance information
    Comments

    All insurance coverages for the patient which may be applicable for reimbursement, of the products and services listed in the claim, are typically provided in the claim to allow insurers to confirm the ordering of the insurance coverages relative to local 'coordination of benefit' rules. One coverage (and only one) with 'focal=true' is to be used in the adjudication of this claim. Coverages appearing before the focal Coverage in the list, and where 'Coverage.subrogation=false', should provide a reference to the ClaimResponse containing the adjudication results of the prior claim.

    Control1..*
    TypeBackboneElement
    Is Modifierfalse
    Summarytrue
    Requirements

    At least one insurer is required for a claim to be a claim.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    60. Claim.insurance.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    62. Claim.insurance.sequence
    Definition

    A number to uniquely identify insurance entries and provide a sequence of coverages to convey coordination of benefit order.

    ShortInsurance instance identifier
    Control1..1
    TypepositiveInt
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    To maintain order of the coverages.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    64. Claim.insurance.focal
    Definition

    A flag to indicate that this Coverage is to be used for adjudication of this claim when set to true.

    ShortCoverage to be used for adjudication
    Comments

    A patient may (will) have multiple insurance policies which provide reimbursement for healthcare services and products. For example a person may also be covered by their spouse's policy and both appear in the list (and may be from the same insurer). This flag will be set to true for only one of the listed policies and that policy will be used for adjudicating this claim. Other claims would be created to request adjudication against the other listed policies.

    Control1..1
    Typeboolean
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    To identify which coverage in the list is being used to adjudicate this claim.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    66. Claim.insurance.coverage
    Definition

    Reference to the insurance card level information contained in the Coverage resource. The coverage issuing insurer will use these details to locate the patient's actual coverage within the insurer's information system.

    ShortInsurance information
    Control1..1
    TypeReference(Coverage)
    Is Modifierfalse
    Summarytrue
    Requirements

    Required to allow the adjudicator to locate the correct policy and history within their information system.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    68. Claim.item
    Definition

    A claim line. Either a simple product or service or a 'group' of details which can each be a simple items or groups of sub-details.

    ShortEach individual product or service being claimed for as part of this claimProduct or service provided
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Requirements

    The items to be processed for adjudication.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    70. Claim.item.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Claim.item.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 72. Claim.item.extension:patientPaid
      Slice NamepatientPaid
      Definition

      Co-payment amount paid by patient for shared care services

      ShortShared Care Patient Copayment
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(Shared Care Patient Copayment) (Extension Type: Money)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      74. Claim.item.extension:itemTax
      Slice NameitemTax
      Definition

      Tax amount claimed for shared care service items

      ShortShared Care Item Tax
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(Shared Care Item Tax) (Extension Type: Money)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      76. Claim.item.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      78. Claim.item.sequence
      Definition

      A number to uniquely identify item entries.

      ShortReferred to by the ClaimResponse.item.itemSequenceItem instance identifier
      Control1..1
      TypepositiveInt
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Necessary to provide a mechanism to link to items from within the claim and within the adjudication details of the ClaimResponse.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      80. Claim.item.productOrService
      Definition

      When the value is a group code then this item collects a set of related claim details, otherwise this contains the product, service, drug or other billing code for the item.

      ShortPurchase unit code for the transactionBilling, service, product, or drug code
      Comments

      If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

      Control1..1
      BindingFor example codes, see USCLSCodeshttp://hl7.org/fhir/ValueSet/service-uscls|4.0.1
      (example to http://hl7.org/fhir/ValueSet/service-uscls|4.0.1)

      Allowable service and product codes.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      Necessary to state what was provided or done.

      Alternate NamesDrug Code, Bill Code, Service Code
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      82. Claim.item.location[x]
      Definition

      Where the product or service was provided.

      ShortPlace of service or where product was supplied
      Control0..1
      BindingFor example codes, see ExampleServicePlaceCodeshttp://hl7.org/fhir/ValueSet/service-place|4.0.1
      (example to http://hl7.org/fhir/ValueSet/service-place|4.0.1)

      Place of service: pharmacy, school, prison, etc.

      TypeChoice of: CodeableConcept, Address, Reference(Location)
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Summaryfalse
      Requirements

      The location can alter whether the item was acceptable for insurance purposes or impact the determination of the benefit amount.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Claim.item.location[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • type @ $this
      • 84. Claim.item.location[x]:locationReference
        Slice NamelocationReference
        Definition

        Where the product or service was provided.

        ShortHPI FacilityPlace of service or where product was supplied
        Control0..1
        TypeReference(Location, Location), Address, CodeableConcept
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Summaryfalse
        Requirements

        The location can alter whether the item was acceptable for insurance purposes or impact the determination of the benefit amount.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        86. Claim.item.quantity
        Definition

        The number of repetitions of a service or product.

        ShortNumber of units claimed for product or serviceCount of products or services
        Control0..1
        TypeQuantity(SimpleQuantity)
        Is Modifierfalse
        Summaryfalse
        Requirements

        Required when the product or service code does not convey the quantity provided.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        88. Claim.item.unitPrice
        Definition

        If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

        ShortClaimed unit price of the serviceFee, charge or cost per item
        Control0..1
        TypeMoney
        Is Modifierfalse
        Summaryfalse
        Requirements

        The amount charged to the patient by the provider for a single unit.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        90. Claim.item.net
        Definition

        The quantity times the unit price for an additional service or product or charge.

        ShortClaimed pre-tax amountTotal item cost
        Comments

        For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

        Control0..1
        TypeMoney
        Is Modifierfalse
        Summaryfalse
        Requirements

        Provides the total amount claimed for the group (if a grouper) or the line item.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        92. Claim.item.encounter
        Definition

        The Encounters during which this Claim was created or to which the creation of this record is tightly associated.

        ShortThe (e.g. Telehealth) encounter for which this claim is madeEncounters related to this billed item
        Comments

        This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

        Control0..*
        TypeReference(Encounter)
        Is Modifierfalse
        Summaryfalse
        Requirements

        Used in some jurisdictions to link clinical events to claim items.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        94. Claim.item.detail
        Definition

        A claim detail line. Either a simple (a product or service) or a 'group' of sub-details which are simple items.

        ShortAdditional detail for the claim itemProduct or service provided
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Requirements

        The items to be processed for adjudication.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        96. Claim.item.detail.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        98. Claim.item.detail.sequence
        Definition

        A number to uniquely identify item entries.

        ShortItem instance identifier
        Control1..1
        TypepositiveInt
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Necessary to provide a mechanism to link to items from within the claim and within the adjudication details of the ClaimResponse.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        100. Claim.item.detail.productOrService
        Definition

        When the value is a group code then this item collects a set of related claim details, otherwise this contains the product, service, drug or other billing code for the item.

        ShortBilling, service, product, or drug code
        Comments

        If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

        Control1..1
        BindingFor example codes, see USCLSCodeshttp://hl7.org/fhir/ValueSet/service-uscls|4.0.1
        (example to http://hl7.org/fhir/ValueSet/service-uscls|4.0.1)

        Allowable service and product codes.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Necessary to state what was provided or done.

        Alternate NamesDrug Code, Bill Code, Service Code
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        102. Claim.total
        Definition

        The total value of the all the items in the claim.

        ShortTotal value of all of the claim itemsTotal claim cost
        Control10..1
        TypeMoney
        Is Modifierfalse
        Summaryfalse
        Requirements

        Used for control total purposes.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

        Guidance on how to interpret the contents of this table can be foundhere

        0. Claim
        2. Claim.extension
        SlicingThis element introduces a set of slices on Claim.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 4. Claim.extension:traceNumber
          Slice NametraceNumber
          Control0..*
          TypeExtension(Shared Care Claim Trace Number) (Extension Type: Identifier)
          6. Claim.identifier
          ShortBusiness identifier(s) for the claim
          Comments

          Business identifier(s) for the claim (external and/or internal identifiers)

          NoteThis is a business identifier, not a resource identifier (see discussion)
          8. Claim.type
          ShortClaim type
          Comments

          Outpatient claim from a telehealth physician

          BindingUnless not suitable, these codes SHALL be taken from NZ Claim Types
          (extensible to https://fhir-ig.digital.health.nz/shared-care/ValueSet/nz-claim-types)
          10. Claim.subType
          ShortClaim subtype
          BindingUnless not suitable, these codes SHALL be taken from NZ Claim Subtypes
          (extensible to https://fhir-ig.digital.health.nz/shared-care/ValueSet/nz-claim-subtypes)
          12. Claim.patient
          ShortPatient with NHI
          14. Claim.billablePeriod
          ShortClaim period or billing period
          16. Claim.created
          ShortWhen the claim was created (by the provider)
          18. Claim.insurer
          ShortPayer (i.e. Health NZ)
          20. Claim.provider
          ShortLegal entity who submitted the claim
          Comments

          Legal entity who submitted the claim - identifiable by its HPI identifier (or also its NZBN)

          TypeReference(Organization)
          22. Claim.payee
          ShortWho's getting paid - Provider Site in HSAAP
          Comments

          Should correspond to a Provider Site in HSAAP that is the holder of the agreement/contract and a Supplier Site in FPIM

          24. Claim.careTeam
          ShortPractitioner(s) who provided the claimed service(s)
          26. Claim.careTeam.provider
          TypeReference(Practitioner)
          28. Claim.careTeam.role
          BindingUnless not suitable, these codes SHALL be taken from Claim Care Team Role Codes
          (extensible to https://fhir-ig.digital.health.nz/shared-care/ValueSet/claim-careteam-role-codes)
          30. Claim.careTeam.qualification
          BindingUnless not suitable, these codes SHALL be taken from Provider Qualification Codes
          (extensible to https://fhir-ig.digital.health.nz/shared-care/ValueSet/provider-qualification-codes)
          32. Claim.supportingInfo
          ShortAdditional attributes that may accompany a Claim
          Comments

          Additional attributes that may accompany a Claim including categorisation, coding, date or time, value, and reason. Probably not required by a 24/7 Telehealth claim but used for more specialised HSAAP pharmacy claims.

          34. Claim.item
          ShortEach individual product or service being claimed for as part of this claim
          36. Claim.item.extension
          SlicingThis element introduces a set of slices on Claim.item.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 38. Claim.item.extension:patientPaid
            Slice NamepatientPaid
            Control0..1
            TypeExtension(Shared Care Patient Copayment) (Extension Type: Money)
            40. Claim.item.extension:itemTax
            Slice NameitemTax
            Control0..1
            TypeExtension(Shared Care Item Tax) (Extension Type: Money)
            42. Claim.item.sequence
            ShortReferred to by the ClaimResponse.item.itemSequence
            Must Supporttrue
            44. Claim.item.productOrService
            ShortPurchase unit code for the transaction
            Must Supporttrue
            46. Claim.item.location[x]
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            SlicingThis element introduces a set of slices on Claim.item.location[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • type @ $this
            • 48. Claim.item.location[x]:locationReference
              Slice NamelocationReference
              ShortHPI Facility
              Control0..1
              TypeReference(Location)
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              50. Claim.item.quantity
              ShortNumber of units claimed for product or service
              52. Claim.item.unitPrice
              ShortClaimed unit price of the service
              54. Claim.item.net
              ShortClaimed pre-tax amount
              56. Claim.item.encounter
              ShortThe (e.g. Telehealth) encounter for which this claim is made
              58. Claim.item.detail
              ShortAdditional detail for the claim item
              60. Claim.total
              ShortTotal value of all of the claim items
              Control1..?

              Guidance on how to interpret the contents of this table can be foundhere

              0. Claim
              Definition

              A provider issued list of professional services and products which have been provided, or are to be provided, to a patient which is sent to an insurer for reimbursement.

              ShortClaim, Pre-determination or Pre-authorization
              Comments

              The Claim resource fulfills three information request requirements: Claim - a request for adjudication for reimbursement for products and/or services provided; Preauthorization - a request to authorize the future provision of products and/or services including an anticipated adjudication; and, Predetermination - a request for a non-bind adjudication of possible future products and/or services.

              Control0..*
              Is Modifierfalse
              Summaryfalse
              Alternate NamesAdjudication Request, Preauthorization Request, Predetermination Request
              Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
              dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
              dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
              dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
              dom-6: A resource should have narrative for robust management (text.`div`.exists())
              2. Claim.id
              Definition

              The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

              ShortLogical id of this artifact
              Comments

              The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

              Control0..1
              Typeid
              Is Modifierfalse
              Summarytrue
              4. Claim.meta
              Definition

              The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

              ShortMetadata about the resource
              Control0..1
              TypeMeta
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              6. Claim.implicitRules
              Definition

              A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

              ShortA set of rules under which this content was created
              Comments

              Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

              Control0..1
              Typeuri
              Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              8. Claim.language
              Definition

              The base language in which the resource is written.

              ShortLanguage of the resource content
              Comments

              Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

              Control0..1
              BindingThe codes SHOULD be taken from CommonLanguages
              (preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

              A human language.

              Additional BindingsPurpose
              AllLanguagesMax Binding
              Typecode
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              10. Claim.text
              Definition

              A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

              ShortText summary of the resource, for human interpretation
              Comments

              Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

              Control0..1
              TypeNarrative
              Is Modifierfalse
              Summaryfalse
              Alternate Namesnarrative, html, xhtml, display
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              12. Claim.contained
              Definition

              These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

              ShortContained, inline Resources
              Comments

              This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

              Control0..*
              TypeResource
              Is Modifierfalse
              Summaryfalse
              Alternate Namesinline resources, anonymous resources, contained resources
              14. Claim.extension
              Definition

              An Extension

              ShortExtension
              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Claim.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 16. Claim.extension:traceNumber
                Slice NametraceNumber
                Definition

                Internal primary key ID for shared care claim tracking

                ShortShared Care Claim Trace Number
                Control0..*
                This element is affected by the following invariants: ele-1
                TypeExtension(Shared Care Claim Trace Number) (Extension Type: Identifier)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                18. Claim.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                Summaryfalse
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                20. Claim.identifier
                Definition

                A unique identifier assigned to this claim.

                ShortBusiness identifier(s) for the claim
                Comments

                Business identifier(s) for the claim (external and/or internal identifiers)

                NoteThis is a business identifier, not a resource identifier (see discussion)
                Control0..*
                TypeIdentifier
                Is Modifierfalse
                Summaryfalse
                Requirements

                Allows claims to be distinguished and referenced.

                Alternate NamesClaim Number
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                22. Claim.status
                Definition

                The status of the resource instance.

                Shortactive | cancelled | draft | entered-in-error
                Comments

                This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

                Control1..1
                BindingThe codes SHALL be taken from FinancialResourceStatusCodes
                (required to http://hl7.org/fhir/ValueSet/fm-status|4.0.1)

                A code specifying the state of the resource instance.

                Typecode
                Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                24. Claim.type
                Definition

                The category of claim, e.g. oral, pharmacy, vision, institutional, professional.

                ShortClaim type
                Comments

                Outpatient claim from a telehealth physician

                Control1..1
                BindingUnless not suitable, these codes SHALL be taken from NZ Claim Types
                (extensible to https://fhir-ig.digital.health.nz/shared-care/ValueSet/nz-claim-types)
                TypeCodeableConcept
                Is Modifierfalse
                Summarytrue
                Requirements

                Claim type determine the general sets of business rules applied for information requirements and adjudication.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                26. Claim.subType
                Definition

                A finer grained suite of claim type codes which may convey additional information such as Inpatient vs Outpatient and/or a specialty service.

                ShortClaim subtype
                Comments

                This may contain the local bill type codes, for example the US UB-04 bill type code or the CMS bill type.

                Control0..1
                BindingUnless not suitable, these codes SHALL be taken from NZ Claim Subtypes
                (extensible to https://fhir-ig.digital.health.nz/shared-care/ValueSet/nz-claim-subtypes)
                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Requirements

                Some jurisdictions need a finer grained claim type for routing and adjudication.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                28. Claim.use
                Definition

                A code to indicate whether the nature of the request is: to request adjudication of products and services previously rendered; or requesting authorization and adjudication for provision in the future; or requesting the non-binding adjudication of the listed products and services which could be provided in the future.

                Shortclaim | preauthorization | predetermination
                Control1..1
                BindingThe codes SHALL be taken from Use
                (required to http://hl7.org/fhir/ValueSet/claim-use|4.0.1)

                The purpose of the Claim: predetermination, preauthorization, claim.

                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                This element is required to understand the nature of the request for adjudication.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                30. Claim.patient
                Definition

                The party to whom the professional services and/or products have been supplied or are being considered and for whom actual or forecast reimbursement is sought.

                ShortPatient with NHI
                Control1..1
                TypeReference(Patient)
                Is Modifierfalse
                Summarytrue
                Requirements

                The patient must be supplied to the insurer so that confirmation of coverage and service history may be considered as part of the authorization and/or adjudiction.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                32. Claim.billablePeriod
                Definition

                The period for which charges are being submitted.

                ShortClaim period or billing period
                Comments

                Typically this would be today or in the past for a claim, and today or in the future for preauthorizations and predeterminations. Typically line item dates of service should fall within the billing period if one is specified.

                Control0..1
                TypePeriod
                Is Modifierfalse
                Summarytrue
                Requirements

                A number jurisdictions required the submission of the billing period when submitting claims for example for hospital stays or long-term care.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                34. Claim.created
                Definition

                The date this resource was created.

                ShortWhen the claim was created (by the provider)
                Comments

                This field is independent of the date of creation of the resource as it may reflect the creation date of a source document prior to digitization. Typically for claims all services must be completed as of this date.

                Control1..1
                TypedateTime
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                Need to record a timestamp for use by both the recipient and the issuer.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                36. Claim.enterer
                Definition

                Individual who created the claim, predetermination or preauthorization.

                ShortAuthor of the claim
                Control0..1
                TypeReference(Practitioner, PractitionerRole)
                Is Modifierfalse
                Summaryfalse
                Requirements

                Some jurisdictions require the contact information for personnel completing claims.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                38. Claim.insurer
                Definition

                The Insurer who is target of the request.

                ShortPayer (i.e. Health NZ)
                Control0..1
                TypeReference(Organization)
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                40. Claim.provider
                Definition

                The provider which is responsible for the claim, predetermination or preauthorization.

                ShortLegal entity who submitted the claim
                Comments

                Legal entity who submitted the claim - identifiable by its HPI identifier (or also its NZBN)

                Control1..1
                TypeReference(Organization)
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                42. Claim.priority
                Definition

                The provider-required urgency of processing the request. Typical values include: stat, routine deferred.

                ShortDesired processing ugency
                Comments

                If a claim processor is unable to complete the processing as per the priority then they should generate and error and not process the request.

                Control1..1
                BindingFor example codes, see ProcessPriorityCodes
                (example to http://hl7.org/fhir/ValueSet/process-priority|4.0.1)

                The timeliness with which processing is required: stat, normal, deferred.

                TypeCodeableConcept
                Is Modifierfalse
                Summarytrue
                Requirements

                The provider may need to indicate their processing requirements so that the processor can indicate if they are unable to comply.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                44. Claim.fundsReserve
                Definition

                A code to indicate whether and for whom funds are to be reserved for future claims.

                ShortFor whom to reserve funds
                Comments

                This field is only used for preauthorizations.

                Control0..1
                BindingFor example codes, see Funds Reservation Codes
                (example to http://hl7.org/fhir/ValueSet/fundsreserve|4.0.1)

                For whom funds are to be reserved: (Patient, Provider, None).

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Requirements

                In the case of a Pre-Determination/Pre-Authorization the provider may request that funds in the amount of the expected Benefit be reserved ('Patient' or 'Provider') to pay for the Benefits determined on the subsequent claim(s). 'None' explicitly indicates no funds reserving is requested.

                Alternate NamesFund pre-allocation
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                46. Claim.related
                Definition

                Other claims which are related to this claim such as prior submissions or claims for related services or for the same event.

                ShortPrior or corollary claims
                Comments

                For example, for the original treatment and follow-up exams.

                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Summaryfalse
                Requirements

                For workplace or other accidents it is common to relate separate claims arising from the same event.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                48. Claim.related.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                50. Claim.related.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                52. Claim.related.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                54. Claim.related.claim
                Definition

                Reference to a related claim.

                ShortReference to the related claim
                Control0..1
                TypeReference(Claim)
                Is Modifierfalse
                Summaryfalse
                Requirements

                For workplace or other accidents it is common to relate separate claims arising from the same event.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                56. Claim.related.relationship
                Definition

                A code to convey how the claims are related.

                ShortHow the reference claim is related
                Comments

                For example, prior claim or umbrella.

                Control0..1
                BindingFor example codes, see ExampleRelatedClaimRelationshipCodes
                (example to http://hl7.org/fhir/ValueSet/related-claim-relationship|4.0.1)

                Relationship of this claim to a related Claim.

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Requirements

                Some insurers need a declaration of the type of relationship.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                58. Claim.related.reference
                Definition

                An alternate organizational reference to the case or file to which this particular claim pertains.

                ShortFile or case reference
                Comments

                For example, Property/Casualty insurer claim # or Workers Compensation case # .

                Control0..1
                TypeIdentifier
                Is Modifierfalse
                Summaryfalse
                Requirements

                In cases where an event-triggered claim is being submitted to an insurer which requires a reference number to be specified on all exchanges.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                60. Claim.prescription
                Definition

                Prescription to support the dispensing of pharmacy, device or vision products.

                ShortPrescription authorizing services and products
                Control0..1
                TypeReference(DeviceRequest, MedicationRequest, VisionPrescription)
                Is Modifierfalse
                Summaryfalse
                Requirements

                Required to authorize the dispensing of controlled substances and devices.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                62. Claim.originalPrescription
                Definition

                Original prescription which has been superseded by this prescription to support the dispensing of pharmacy services, medications or products.

                ShortOriginal prescription if superseded by fulfiller
                Comments

                For example, a physician may prescribe a medication which the pharmacy determines is contraindicated, or for which the patient has an intolerance, and therefore issues a new prescription for an alternate medication which has the same therapeutic intent. The prescription from the pharmacy becomes the 'prescription' and that from the physician becomes the 'original prescription'.

                Control0..1
                TypeReference(DeviceRequest, MedicationRequest, VisionPrescription)
                Is Modifierfalse
                Summaryfalse
                Requirements

                Often required when a fulfiller varies what is fulfilled from that authorized on the original prescription.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                64. Claim.payee
                Definition

                The party to be reimbursed for cost of the products and services according to the terms of the policy.

                ShortWho's getting paid - Provider Site in HSAAP
                Comments

                Should correspond to a Provider Site in HSAAP that is the holder of the agreement/contract and a Supplier Site in FPIM

                Control0..1
                TypeBackboneElement
                Is Modifierfalse
                Summaryfalse
                Requirements

                The provider needs to specify who they wish to be reimbursed and the claims processor needs express who they will reimburse.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                66. Claim.payee.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                68. Claim.payee.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                70. Claim.payee.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                72. Claim.payee.type
                Definition

                Type of Party to be reimbursed: subscriber, provider, other.

                ShortCategory of recipient
                Control1..1
                BindingFor example codes, see Claim Payee Type Codes
                (example to http://hl7.org/fhir/ValueSet/payeetype|4.0.1)

                A code for the party to be reimbursed.

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Requirements

                Need to know who should receive payment with the most common situations being the Provider (assignment of benefits) or the Subscriber.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                74. Claim.payee.party
                Definition

                Reference to the individual or organization to whom any payment will be made.

                ShortRecipient reference
                Comments

                Not required if the payee is 'subscriber' or 'provider'.

                Control0..1
                TypeReference(Practitioner, PractitionerRole, Organization, Patient, RelatedPerson)
                Is Modifierfalse
                Summaryfalse
                Requirements

                Need to provide demographics if the payee is not 'subscriber' nor 'provider'.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                76. Claim.referral
                Definition

                A reference to a referral resource.

                ShortTreatment referral
                Comments

                The referral resource which lists the date, practitioner, reason and other supporting information.

                Control0..1
                TypeReference(ServiceRequest)
                Is Modifierfalse
                Summaryfalse
                Requirements

                Some insurers require proof of referral to pay for services or to pay specialist rates for services.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                78. Claim.facility
                Definition

                Facility where the services were provided.

                ShortServicing facility
                Control0..1
                TypeReference(Location)
                Is Modifierfalse
                Summaryfalse
                Requirements

                Insurance adjudication can be dependant on where services were delivered.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                80. Claim.careTeam
                Definition

                The members of the team who provided the products and services.

                ShortPractitioner(s) who provided the claimed service(s)
                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Summaryfalse
                Requirements

                Common to identify the responsible and supporting practitioners.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                82. Claim.careTeam.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                84. Claim.careTeam.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                86. Claim.careTeam.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                88. Claim.careTeam.sequence
                Definition

                A number to uniquely identify care team entries.

                ShortOrder of care team
                Control1..1
                TypepositiveInt
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Requirements

                Necessary to maintain the order of the care team and provide a mechanism to link individuals to claim details.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                90. Claim.careTeam.provider
                Definition

                Member of the team who provided the product or service.

                ShortPractitioner or organization
                Control1..1
                TypeReference(Practitioner)
                Is Modifierfalse
                Summaryfalse
                Requirements

                Often a regulatory requirement to specify the responsible provider.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                92. Claim.careTeam.responsible
                Definition

                The party who is billing and/or responsible for the claimed products or services.

                ShortIndicator of the lead practitioner
                Comments

                Responsible might not be required when there is only a single provider listed.

                Control0..1
                Typeboolean
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Requirements

                When multiple parties are present it is required to distinguish the lead or responsible individual.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                94. Claim.careTeam.role
                Definition

                The lead, assisting or supervising practitioner and their discipline if a multidisciplinary team.

                ShortFunction within the team
                Comments

                Role might not be required when there is only a single provider listed.

                Control0..1
                BindingUnless not suitable, these codes SHALL be taken from Claim Care Team Role Codes
                (extensible to https://fhir-ig.digital.health.nz/shared-care/ValueSet/claim-careteam-role-codes)
                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Requirements

                When multiple parties are present it is required to distinguish the roles performed by each member.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                96. Claim.careTeam.qualification
                Definition

                The qualification of the practitioner which is applicable for this service.

                ShortPractitioner credential or specialization
                Control0..1
                BindingUnless not suitable, these codes SHALL be taken from Provider Qualification Codes
                (extensible to https://fhir-ig.digital.health.nz/shared-care/ValueSet/provider-qualification-codes)
                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Requirements

                Need to specify which qualification a provider is delivering the product or service under.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                98. Claim.supportingInfo
                Definition

                Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues.

                ShortAdditional attributes that may accompany a Claim
                Comments

                Additional attributes that may accompany a Claim including categorisation, coding, date or time, value, and reason. Probably not required by a 24/7 Telehealth claim but used for more specialised HSAAP pharmacy claims.

                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Summaryfalse
                Requirements

                Typically these information codes are required to support the services rendered or the adjudication of the services rendered.

                Alternate NamesAttachments Exception Codes Occurrence Codes Value codes
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                100. Claim.supportingInfo.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                102. Claim.supportingInfo.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                104. Claim.supportingInfo.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                106. Claim.supportingInfo.sequence
                Definition

                A number to uniquely identify supporting information entries.

                ShortInformation instance identifier
                Control1..1
                TypepositiveInt
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Requirements

                Necessary to maintain the order of the supporting information items and provide a mechanism to link to claim details.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                108. Claim.supportingInfo.category
                Definition

                The general class of the information supplied: information; exception; accident, employment; onset, etc.

                ShortClassification of the supplied information
                Comments

                This may contain a category for the local bill type codes.

                Control1..1
                BindingFor example codes, see ClaimInformationCategoryCodes
                (example to http://hl7.org/fhir/ValueSet/claim-informationcategory|4.0.1)

                The valuset used for additional information category codes.

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Requirements

                Required to group or associate information items with common characteristics. For example: admission information or prior treatments.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                110. Claim.supportingInfo.code
                Definition

                System and code pertaining to the specific information regarding special conditions relating to the setting, treatment or patient for which care is sought.

                ShortType of information
                Control0..1
                BindingFor example codes, see ExceptionCodes
                (example to http://hl7.org/fhir/ValueSet/claim-exception|4.0.1)

                The valuset used for additional information codes.

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Requirements

                Required to identify the kind of additional information.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                112. Claim.supportingInfo.timing[x]
                Definition

                The date when or period to which this information refers.

                ShortWhen it occurred
                Control0..1
                TypeChoice of: date, Period
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                114. Claim.supportingInfo.value[x]
                Definition

                Additional data or information such as resources, documents, images etc. including references to the data or the actual inclusion of the data.

                ShortData to be provided
                Comments

                Could be used to provide references to other resources, document. For example could contain a PDF in an Attachment of the Police Report for an Accident.

                Control0..1
                TypeChoice of: boolean, string, Quantity, Attachment, Reference(Resource)
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Requirements

                To convey the data content to be provided when the information is more than a simple code or period.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                116. Claim.supportingInfo.reason
                Definition

                Provides the reason in the situation where a reason code is required in addition to the content.

                ShortExplanation for the information
                Comments

                For example: the reason for the additional stay, or why a tooth is missing.

                Control0..1
                BindingFor example codes, see MissingToothReasonCodes
                (example to http://hl7.org/fhir/ValueSet/missing-tooth-reason|4.0.1)

                Reason codes for the missing teeth.

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Requirements

                Needed when the supporting information has both a date and amount/value and requires explanation.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                118. Claim.diagnosis
                Definition

                Information about diagnoses relevant to the claim items.

                ShortPertinent diagnosis information
                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Summaryfalse
                Requirements

                Required for the adjudication by provided context for the services and product listed.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                120. Claim.diagnosis.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                122. Claim.diagnosis.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                124. Claim.diagnosis.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                126. Claim.diagnosis.sequence
                Definition

                A number to uniquely identify diagnosis entries.

                ShortDiagnosis instance identifier
                Comments

                Diagnosis are presented in list order to their expected importance: primary, secondary, etc.

                Control1..1
                TypepositiveInt
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Requirements

                Necessary to maintain the order of the diagnosis items and provide a mechanism to link to claim details.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                128. Claim.diagnosis.diagnosis[x]
                Definition

                The nature of illness or problem in a coded form or as a reference to an external defined Condition.

                ShortNature of illness or problem
                Control1..1
                BindingFor example codes, see ICD-10Codes
                (example to http://hl7.org/fhir/ValueSet/icd-10|4.0.1)

                Example ICD10 Diagnostic codes.

                TypeChoice of: CodeableConcept, Reference(Condition)
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Summaryfalse
                Requirements

                Provides health context for the evaluation of the products and/or services.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                130. Claim.diagnosis.type
                Definition

                When the condition was observed or the relative ranking.

                ShortTiming or nature of the diagnosis
                Comments

                For example: admitting, primary, secondary, discharge.

                Control0..*
                BindingFor example codes, see ExampleDiagnosisTypeCodes
                (example to http://hl7.org/fhir/ValueSet/ex-diagnosistype|4.0.1)

                The type of the diagnosis: admitting, principal, discharge.

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Requirements

                Often required to capture a particular diagnosis, for example: primary or discharge.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                132. Claim.diagnosis.onAdmission
                Definition

                Indication of whether the diagnosis was present on admission to a facility.

                ShortPresent on admission
                Control0..1
                BindingFor example codes, see ExampleDiagnosisOnAdmissionCodes
                (example to http://hl7.org/fhir/ValueSet/ex-diagnosis-on-admission|4.0.1)

                Present on admission.

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Requirements

                Many systems need to understand for adjudication if the diagnosis was present a time of admission.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                134. Claim.diagnosis.packageCode
                Definition

                A package billing code or bundle code used to group products and services to a particular health condition (such as heart attack) which is based on a predetermined grouping code system.

                ShortPackage billing code
                Comments

                For example DRG (Diagnosis Related Group) or a bundled billing code. A patient may have a diagnosis of a Myocardial Infarction and a DRG for HeartAttack would be assigned. The Claim item (and possible subsequent claims) would refer to the DRG for those line items that were for services related to the heart attack event.

                Control0..1
                BindingFor example codes, see ExampleDiagnosisRelatedGroupCodes
                (example to http://hl7.org/fhir/ValueSet/ex-diagnosisrelatedgroup|4.0.1)

                The DRG codes associated with the diagnosis.

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Requirements

                Required to relate the current diagnosis to a package billing code that is then referenced on the individual claim items which are specific to the health condition covered by the package code.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                136. Claim.procedure
                Definition

                Procedures performed on the patient relevant to the billing items with the claim.

                ShortClinical procedures performed
                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Summaryfalse
                Requirements

                The specific clinical invention are sometimes required to be provided to justify billing a greater than customary amount for a service.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                138. Claim.procedure.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                140. Claim.procedure.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                142. Claim.procedure.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                144. Claim.procedure.sequence
                Definition

                A number to uniquely identify procedure entries.

                ShortProcedure instance identifier
                Control1..1
                TypepositiveInt
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Requirements

                Necessary to provide a mechanism to link to claim details.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                146. Claim.procedure.type
                Definition

                When the condition was observed or the relative ranking.

                ShortCategory of Procedure
                Comments

                For example: primary, secondary.

                Control0..*
                BindingFor example codes, see ExampleProcedureTypeCodes
                (example to http://hl7.org/fhir/ValueSet/ex-procedure-type|4.0.1)

                Example procedure type codes.

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Requirements

                Often required to capture a particular diagnosis, for example: primary or discharge.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                148. Claim.procedure.date
                Definition

                Date and optionally time the procedure was performed.

                ShortWhen the procedure was performed
                Control0..1
                TypedateTime
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Requirements

                Required for auditing purposes.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                150. Claim.procedure.procedure[x]
                Definition

                The code or reference to a Procedure resource which identifies the clinical intervention performed.

                ShortSpecific clinical procedure
                Control1..1
                BindingFor example codes, see ICD-10ProcedureCodes
                (example to http://hl7.org/fhir/ValueSet/icd-10-procedures|4.0.1)

                Example ICD10 Procedure codes.

                TypeChoice of: CodeableConcept, Reference(Procedure)
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Summaryfalse
                Requirements

                This identifies the actual clinical procedure.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                152. Claim.procedure.udi
                Definition

                Unique Device Identifiers associated with this line item.

                ShortUnique device identifier
                Control0..*
                TypeReference(Device)
                Is Modifierfalse
                Summaryfalse
                Requirements

                The UDI code allows the insurer to obtain device level information on the product supplied.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                154. Claim.insurance
                Definition

                Financial instruments for reimbursement for the health care products and services specified on the claim.

                ShortPatient insurance information
                Comments

                All insurance coverages for the patient which may be applicable for reimbursement, of the products and services listed in the claim, are typically provided in the claim to allow insurers to confirm the ordering of the insurance coverages relative to local 'coordination of benefit' rules. One coverage (and only one) with 'focal=true' is to be used in the adjudication of this claim. Coverages appearing before the focal Coverage in the list, and where 'Coverage.subrogation=false', should provide a reference to the ClaimResponse containing the adjudication results of the prior claim.

                Control1..*
                TypeBackboneElement
                Is Modifierfalse
                Summarytrue
                Requirements

                At least one insurer is required for a claim to be a claim.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                156. Claim.insurance.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                158. Claim.insurance.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                160. Claim.insurance.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                162. Claim.insurance.sequence
                Definition

                A number to uniquely identify insurance entries and provide a sequence of coverages to convey coordination of benefit order.

                ShortInsurance instance identifier
                Control1..1
                TypepositiveInt
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                To maintain order of the coverages.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                164. Claim.insurance.focal
                Definition

                A flag to indicate that this Coverage is to be used for adjudication of this claim when set to true.

                ShortCoverage to be used for adjudication
                Comments

                A patient may (will) have multiple insurance policies which provide reimbursement for healthcare services and products. For example a person may also be covered by their spouse's policy and both appear in the list (and may be from the same insurer). This flag will be set to true for only one of the listed policies and that policy will be used for adjudicating this claim. Other claims would be created to request adjudication against the other listed policies.

                Control1..1
                Typeboolean
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                To identify which coverage in the list is being used to adjudicate this claim.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                166. Claim.insurance.identifier
                Definition

                The business identifier to be used when the claim is sent for adjudication against this insurance policy.

                ShortPre-assigned Claim number
                Comments

                Only required in jurisdictions where insurers, rather than the provider, are required to send claims to insurers that appear after them in the list. This element is not required when 'subrogation=true'.

                NoteThis is a business identifier, not a resource identifier (see discussion)
                Control0..1
                TypeIdentifier
                Is Modifierfalse
                Summaryfalse
                Requirements

                This will be the claim number should it be necessary to create this claim in the future. This is provided so that payors may forward claims to other payors in the Coordination of Benefit for adjudication rather than the provider being required to initiate each adjudication.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                168. Claim.insurance.coverage
                Definition

                Reference to the insurance card level information contained in the Coverage resource. The coverage issuing insurer will use these details to locate the patient's actual coverage within the insurer's information system.

                ShortInsurance information
                Control1..1
                TypeReference(Coverage)
                Is Modifierfalse
                Summarytrue
                Requirements

                Required to allow the adjudicator to locate the correct policy and history within their information system.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                170. Claim.insurance.businessArrangement
                Definition

                A business agreement number established between the provider and the insurer for special business processing purposes.

                ShortAdditional provider contract number
                Control0..1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Requirements

                Providers may have multiple business arrangements with a given insurer and must supply the specific contract number for adjudication.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                172. Claim.insurance.preAuthRef
                Definition

                Reference numbers previously provided by the insurer to the provider to be quoted on subsequent claims containing services or products related to the prior authorization.

                ShortPrior authorization reference number
                Comments

                This value is an alphanumeric string that may be provided over the phone, via text, via paper, or within a ClaimResponse resource and is not a FHIR Identifier.

                Control0..*
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Requirements

                Providers must quote previously issued authorization reference numbers in order to obtain adjudication as previously advised on the Preauthorization.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                174. Claim.insurance.claimResponse
                Definition

                The result of the adjudication of the line items for the Coverage specified in this insurance.

                ShortAdjudication results
                Comments

                Must not be specified when 'focal=true' for this insurance.

                Control0..1
                TypeReference(ClaimResponse)
                Is Modifierfalse
                Summaryfalse
                Requirements

                An insurer need the adjudication results from prior insurers to determine the outstanding balance remaining by item for the items in the curent claim.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                176. Claim.accident
                Definition

                Details of an accident which resulted in injuries which required the products and services listed in the claim.

                ShortDetails of the event
                Control0..1
                TypeBackboneElement
                Is Modifierfalse
                Summaryfalse
                Requirements

                When healthcare products and services are accident related, benefits may be payable under accident provisions of policies, such as automotive, etc before they are payable under normal health insurance.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                178. Claim.accident.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                180. Claim.accident.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                182. Claim.accident.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                184. Claim.accident.date
                Definition

                Date of an accident event related to the products and services contained in the claim.

                ShortWhen the incident occurred
                Comments

                The date of the accident has to precede the dates of the products and services but within a reasonable timeframe.

                Control1..1
                Typedate
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Requirements

                Required for audit purposes and adjudication.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                186. Claim.accident.type
                Definition

                The type or context of the accident event for the purposes of selection of potential insurance coverages and determination of coordination between insurers.

                ShortThe nature of the accident
                Control0..1
                BindingUnless not suitable, these codes SHALL be taken from ActIncidentCode
                (extensible to http://terminology.hl7.org/ValueSet/v3-ActIncidentCode)

                Type of accident: work place, auto, etc.

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Requirements

                Coverage may be dependant on the type of accident.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                188. Claim.accident.location[x]
                Definition

                The physical location of the accident event.

                ShortWhere the event occurred
                Control0..1
                TypeChoice of: Address, Reference(Location)
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Summaryfalse
                Requirements

                Required for audit purposes and determination of applicable insurance liability.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                190. Claim.item
                Definition

                A claim line. Either a simple product or service or a 'group' of details which can each be a simple items or groups of sub-details.

                ShortEach individual product or service being claimed for as part of this claim
                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Summaryfalse
                Requirements

                The items to be processed for adjudication.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                192. Claim.item.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                194. Claim.item.extension
                Definition

                An Extension

                ShortExtension
                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on Claim.item.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 196. Claim.item.extension:patientPaid
                  Slice NamepatientPaid
                  Definition

                  Co-payment amount paid by patient for shared care services

                  ShortShared Care Patient Copayment
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  TypeExtension(Shared Care Patient Copayment) (Extension Type: Money)
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  198. Claim.item.extension:itemTax
                  Slice NameitemTax
                  Definition

                  Tax amount claimed for shared care service items

                  ShortShared Care Item Tax
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  TypeExtension(Shared Care Item Tax) (Extension Type: Money)
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  200. Claim.item.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  202. Claim.item.sequence
                  Definition

                  A number to uniquely identify item entries.

                  ShortReferred to by the ClaimResponse.item.itemSequence
                  Control1..1
                  TypepositiveInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summaryfalse
                  Requirements

                  Necessary to provide a mechanism to link to items from within the claim and within the adjudication details of the ClaimResponse.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  204. Claim.item.careTeamSequence
                  Definition

                  CareTeam members related to this service or product.

                  ShortApplicable careTeam members
                  Control0..*
                  TypepositiveInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summaryfalse
                  Requirements

                  Need to identify the individuals and their roles in the provision of the product or service.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  206. Claim.item.diagnosisSequence
                  Definition

                  Diagnosis applicable for this service or product.

                  ShortApplicable diagnoses
                  Control0..*
                  TypepositiveInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summaryfalse
                  Requirements

                  Need to related the product or service to the associated diagnoses.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  208. Claim.item.procedureSequence
                  Definition

                  Procedures applicable for this service or product.

                  ShortApplicable procedures
                  Control0..*
                  TypepositiveInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summaryfalse
                  Requirements

                  Need to provide any listed specific procedures to support the product or service being claimed.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  210. Claim.item.informationSequence
                  Definition

                  Exceptions, special conditions and supporting information applicable for this service or product.

                  ShortApplicable exception and supporting information
                  Control0..*
                  TypepositiveInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summaryfalse
                  Requirements

                  Need to reference the supporting information items that relate directly to this product or service.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  212. Claim.item.revenue
                  Definition

                  The type of revenue or cost center providing the product and/or service.

                  ShortRevenue or cost center code
                  Control0..1
                  BindingFor example codes, see ExampleRevenueCenterCodes
                  (example to http://hl7.org/fhir/ValueSet/ex-revenue-center|4.0.1)

                  Codes for the revenue or cost centers supplying the service and/or products.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  Needed in the processing of institutional claims.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  214. Claim.item.category
                  Definition

                  Code to identify the general type of benefits under which products and services are provided.

                  ShortBenefit classification
                  Comments

                  Examples include Medical Care, Periodontics, Renal Dialysis, Vision Coverage.

                  Control0..1
                  BindingFor example codes, see BenefitCategoryCodes
                  (example to http://hl7.org/fhir/ValueSet/ex-benefitcategory|4.0.1)

                  Benefit categories such as: oral-basic, major, glasses.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  Needed in the processing of institutional claims as this allows the insurer to determine whether a facial X-Ray is for dental, orthopedic, or facial surgery purposes.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  216. Claim.item.productOrService
                  Definition

                  When the value is a group code then this item collects a set of related claim details, otherwise this contains the product, service, drug or other billing code for the item.

                  ShortPurchase unit code for the transaction
                  Comments

                  If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

                  Control1..1
                  BindingFor example codes, see USCLSCodes
                  (example to http://hl7.org/fhir/ValueSet/service-uscls|4.0.1)

                  Allowable service and product codes.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supporttrue
                  Summaryfalse
                  Requirements

                  Necessary to state what was provided or done.

                  Alternate NamesDrug Code, Bill Code, Service Code
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  218. Claim.item.modifier
                  Definition

                  Item typification or modifiers codes to convey additional context for the product or service.

                  ShortProduct or service billing modifiers
                  Comments

                  For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or outside of office hours.

                  Control0..*
                  BindingFor example codes, see ModifierTypeCodes
                  (example to http://hl7.org/fhir/ValueSet/claim-modifiers|4.0.1)

                  Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  To support inclusion of the item for adjudication or to charge an elevated fee.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  220. Claim.item.programCode
                  Definition

                  Identifies the program under which this may be recovered.

                  ShortProgram the product or service is provided under
                  Comments

                  For example: Neonatal program, child dental program or drug users recovery program.

                  Control0..*
                  BindingFor example codes, see ExampleProgramReasonCodes
                  (example to http://hl7.org/fhir/ValueSet/ex-program-code|4.0.1)

                  Program specific reason codes.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  Commonly used in in the identification of publicly provided program focused on population segments or disease classifications.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  222. Claim.item.serviced[x]
                  Definition

                  The date or dates when the service or product was supplied, performed or completed.

                  ShortDate or dates of service or product delivery
                  Control0..1
                  TypeChoice of: date, Period
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summaryfalse
                  Requirements

                  Needed to determine whether the service or product was provided during the term of the insurance coverage.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  224. Claim.item.location[x]
                  Definition

                  Where the product or service was provided.

                  ShortPlace of service or where product was supplied
                  Control0..1
                  BindingFor example codes, see ExampleServicePlaceCodes
                  (example to http://hl7.org/fhir/ValueSet/service-place|4.0.1)

                  Place of service: pharmacy, school, prison, etc.

                  TypeChoice of: CodeableConcept, Address, Reference(Location)
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  The location can alter whether the item was acceptable for insurance purposes or impact the determination of the benefit amount.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  SlicingThis element introduces a set of slices on Claim.item.location[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • type @ $this
                  • 226. Claim.item.location[x]:locationReference
                    Slice NamelocationReference
                    Definition

                    Where the product or service was provided.

                    ShortHPI Facility
                    Control0..1
                    TypeReference(Location)
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    The location can alter whether the item was acceptable for insurance purposes or impact the determination of the benefit amount.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    228. Claim.item.quantity
                    Definition

                    The number of repetitions of a service or product.

                    ShortNumber of units claimed for product or service
                    Control0..1
                    TypeQuantity(SimpleQuantity)
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Required when the product or service code does not convey the quantity provided.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    230. Claim.item.unitPrice
                    Definition

                    If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

                    ShortClaimed unit price of the service
                    Control0..1
                    TypeMoney
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    The amount charged to the patient by the provider for a single unit.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    232. Claim.item.factor
                    Definition

                    A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

                    ShortPrice scaling factor
                    Comments

                    To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

                    Control0..1
                    Typedecimal
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summaryfalse
                    Requirements

                    When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    234. Claim.item.net
                    Definition

                    The quantity times the unit price for an additional service or product or charge.

                    ShortClaimed pre-tax amount
                    Comments

                    For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

                    Control0..1
                    TypeMoney
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Provides the total amount claimed for the group (if a grouper) or the line item.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    236. Claim.item.udi
                    Definition

                    Unique Device Identifiers associated with this line item.

                    ShortUnique device identifier
                    Control0..*
                    TypeReference(Device)
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    The UDI code allows the insurer to obtain device level information on the product supplied.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    238. Claim.item.bodySite
                    Definition

                    Physical service site on the patient (limb, tooth, etc.).

                    ShortAnatomical location
                    Comments

                    For example: Providing a tooth code, allows an insurer to identify a provider performing a filling on a tooth that was previously removed.

                    Control0..1
                    BindingFor example codes, see OralSiteCodes
                    (example to http://hl7.org/fhir/ValueSet/tooth|4.0.1)

                    The code for the teeth, quadrant, sextant and arch.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Allows insurer to validate specific procedures.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    240. Claim.item.subSite
                    Definition

                    A region or surface of the bodySite, e.g. limb region or tooth surface(s).

                    ShortAnatomical sub-location
                    Control0..*
                    BindingFor example codes, see SurfaceCodes
                    (example to http://hl7.org/fhir/ValueSet/surface|4.0.1)

                    The code for the tooth surface and surface combinations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Allows insurer to validate specific procedures.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    242. Claim.item.encounter
                    Definition

                    The Encounters during which this Claim was created or to which the creation of this record is tightly associated.

                    ShortThe (e.g. Telehealth) encounter for which this claim is made
                    Comments

                    This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

                    Control0..*
                    TypeReference(Encounter)
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Used in some jurisdictions to link clinical events to claim items.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    244. Claim.item.detail
                    Definition

                    A claim detail line. Either a simple (a product or service) or a 'group' of sub-details which are simple items.

                    ShortAdditional detail for the claim item
                    Control0..*
                    TypeBackboneElement
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    The items to be processed for adjudication.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    246. Claim.item.detail.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    248. Claim.item.detail.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    250. Claim.item.detail.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    252. Claim.item.detail.sequence
                    Definition

                    A number to uniquely identify item entries.

                    ShortItem instance identifier
                    Control1..1
                    TypepositiveInt
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summaryfalse
                    Requirements

                    Necessary to provide a mechanism to link to items from within the claim and within the adjudication details of the ClaimResponse.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    254. Claim.item.detail.revenue
                    Definition

                    The type of revenue or cost center providing the product and/or service.

                    ShortRevenue or cost center code
                    Control0..1
                    BindingFor example codes, see ExampleRevenueCenterCodes
                    (example to http://hl7.org/fhir/ValueSet/ex-revenue-center|4.0.1)

                    Codes for the revenue or cost centers supplying the service and/or products.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Needed in the processing of institutional claims.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    256. Claim.item.detail.category
                    Definition

                    Code to identify the general type of benefits under which products and services are provided.

                    ShortBenefit classification
                    Comments

                    Examples include Medical Care, Periodontics, Renal Dialysis, Vision Coverage.

                    Control0..1
                    BindingFor example codes, see BenefitCategoryCodes
                    (example to http://hl7.org/fhir/ValueSet/ex-benefitcategory|4.0.1)

                    Benefit categories such as: oral-basic, major, glasses.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Needed in the processing of institutional claims as this allows the insurer to determine whether a facial X-Ray is for dental, orthopedic, or facial surgery purposes.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    258. Claim.item.detail.productOrService
                    Definition

                    When the value is a group code then this item collects a set of related claim details, otherwise this contains the product, service, drug or other billing code for the item.

                    ShortBilling, service, product, or drug code
                    Comments

                    If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

                    Control1..1
                    BindingFor example codes, see USCLSCodes
                    (example to http://hl7.org/fhir/ValueSet/service-uscls|4.0.1)

                    Allowable service and product codes.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Necessary to state what was provided or done.

                    Alternate NamesDrug Code, Bill Code, Service Code
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    260. Claim.item.detail.modifier
                    Definition

                    Item typification or modifiers codes to convey additional context for the product or service.

                    ShortService/Product billing modifiers
                    Comments

                    For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or out of office hours.

                    Control0..*
                    BindingFor example codes, see ModifierTypeCodes
                    (example to http://hl7.org/fhir/ValueSet/claim-modifiers|4.0.1)

                    Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    To support inclusion of the item for adjudication or to charge an elevated fee.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    262. Claim.item.detail.programCode
                    Definition

                    Identifies the program under which this may be recovered.

                    ShortProgram the product or service is provided under
                    Comments

                    For example: Neonatal program, child dental program or drug users recovery program.

                    Control0..*
                    BindingFor example codes, see ExampleProgramReasonCodes
                    (example to http://hl7.org/fhir/ValueSet/ex-program-code|4.0.1)

                    Program specific reason codes.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Commonly used in in the identification of publicly provided program focused on population segments or disease classifications.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    264. Claim.item.detail.quantity
                    Definition

                    The number of repetitions of a service or product.

                    ShortCount of products or services
                    Control0..1
                    TypeQuantity(SimpleQuantity)
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Required when the product or service code does not convey the quantity provided.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    266. Claim.item.detail.unitPrice
                    Definition

                    If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

                    ShortFee, charge or cost per item
                    Control0..1
                    TypeMoney
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    The amount charged to the patient by the provider for a single unit.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    268. Claim.item.detail.factor
                    Definition

                    A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

                    ShortPrice scaling factor
                    Comments

                    To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

                    Control0..1
                    Typedecimal
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summaryfalse
                    Requirements

                    When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    270. Claim.item.detail.net
                    Definition

                    The quantity times the unit price for an additional service or product or charge.

                    ShortTotal item cost
                    Comments

                    For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

                    Control0..1
                    TypeMoney
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Provides the total amount claimed for the group (if a grouper) or the line item.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    272. Claim.item.detail.udi
                    Definition

                    Unique Device Identifiers associated with this line item.

                    ShortUnique device identifier
                    Control0..*
                    TypeReference(Device)
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    The UDI code allows the insurer to obtain device level information on the product supplied.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    274. Claim.item.detail.subDetail
                    Definition

                    A claim detail line. Either a simple (a product or service) or a 'group' of sub-details which are simple items.

                    ShortProduct or service provided
                    Control0..*
                    TypeBackboneElement
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    The items to be processed for adjudication.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    276. Claim.item.detail.subDetail.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    278. Claim.item.detail.subDetail.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    280. Claim.item.detail.subDetail.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    282. Claim.item.detail.subDetail.sequence
                    Definition

                    A number to uniquely identify item entries.

                    ShortItem instance identifier
                    Control1..1
                    TypepositiveInt
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summaryfalse
                    Requirements

                    Necessary to provide a mechanism to link to items from within the claim and within the adjudication details of the ClaimResponse.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    284. Claim.item.detail.subDetail.revenue
                    Definition

                    The type of revenue or cost center providing the product and/or service.

                    ShortRevenue or cost center code
                    Control0..1
                    BindingFor example codes, see ExampleRevenueCenterCodes
                    (example to http://hl7.org/fhir/ValueSet/ex-revenue-center|4.0.1)

                    Codes for the revenue or cost centers supplying the service and/or products.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Needed in the processing of institutional claims.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    286. Claim.item.detail.subDetail.category
                    Definition

                    Code to identify the general type of benefits under which products and services are provided.

                    ShortBenefit classification
                    Comments

                    Examples include Medical Care, Periodontics, Renal Dialysis, Vision Coverage.

                    Control0..1
                    BindingFor example codes, see BenefitCategoryCodes
                    (example to http://hl7.org/fhir/ValueSet/ex-benefitcategory|4.0.1)

                    Benefit categories such as: oral-basic, major, glasses.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Needed in the processing of institutional claims as this allows the insurer to determine whether a facial X-Ray is for dental, orthopedic, or facial surgery purposes.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    288. Claim.item.detail.subDetail.productOrService
                    Definition

                    When the value is a group code then this item collects a set of related claim details, otherwise this contains the product, service, drug or other billing code for the item.

                    ShortBilling, service, product, or drug code
                    Comments

                    If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

                    Control1..1
                    BindingFor example codes, see USCLSCodes
                    (example to http://hl7.org/fhir/ValueSet/service-uscls|4.0.1)

                    Allowable service and product codes.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Necessary to state what was provided or done.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    290. Claim.item.detail.subDetail.modifier
                    Definition

                    Item typification or modifiers codes to convey additional context for the product or service.

                    ShortService/Product billing modifiers
                    Comments

                    For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or out of office hours.

                    Control0..*
                    BindingFor example codes, see ModifierTypeCodes
                    (example to http://hl7.org/fhir/ValueSet/claim-modifiers|4.0.1)

                    Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    To support inclusion of the item for adjudication or to charge an elevated fee.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    292. Claim.item.detail.subDetail.programCode
                    Definition

                    Identifies the program under which this may be recovered.

                    ShortProgram the product or service is provided under
                    Comments

                    For example: Neonatal program, child dental program or drug users recovery program.

                    Control0..*
                    BindingFor example codes, see ExampleProgramReasonCodes
                    (example to http://hl7.org/fhir/ValueSet/ex-program-code|4.0.1)

                    Program specific reason codes.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Commonly used in in the identification of publicly provided program focused on population segments or disease classifications.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    294. Claim.item.detail.subDetail.quantity
                    Definition

                    The number of repetitions of a service or product.

                    ShortCount of products or services
                    Control0..1
                    TypeQuantity(SimpleQuantity)
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Required when the product or service code does not convey the quantity provided.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    296. Claim.item.detail.subDetail.unitPrice
                    Definition

                    If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

                    ShortFee, charge or cost per item
                    Control0..1
                    TypeMoney
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    The amount charged to the patient by the provider for a single unit.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    298. Claim.item.detail.subDetail.factor
                    Definition

                    A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

                    ShortPrice scaling factor
                    Comments

                    To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

                    Control0..1
                    Typedecimal
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summaryfalse
                    Requirements

                    When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    300. Claim.item.detail.subDetail.net
                    Definition

                    The quantity times the unit price for an additional service or product or charge.

                    ShortTotal item cost
                    Comments

                    For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

                    Control0..1
                    TypeMoney
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Provides the total amount claimed for the group (if a grouper) or the line item.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    302. Claim.item.detail.subDetail.udi
                    Definition

                    Unique Device Identifiers associated with this line item.

                    ShortUnique device identifier
                    Control0..*
                    TypeReference(Device)
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    The UDI code allows the insurer to obtain device level information on the product supplied.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    304. Claim.total
                    Definition

                    The total value of the all the items in the claim.

                    ShortTotal value of all of the claim items
                    Control1..1
                    TypeMoney
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Used for control total purposes.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))